Design Soccer::

Soccer is a multi-directional ground level sport. However, the ball is often kicked into the air. Lighting criteria for college, high school, and recreational play. Stadium lighting should be specially designed with proper orientations, locations, illuminances and cotnrols that will satisfy the needs for any type of contingency. Typical designs are not recommended here because of the wide variation in stadium configuration. Furthermore the project must consider quality of cutoff or spill light control.

Class I - Facility with OVER 5000 spectator capacity
Class II - Facility with UNDER 5000 spectator capacity
Class III - Facility with SOME spectator capacity
Class IV - Facility with NO spectator capacity

SPORT	LIGHTED AREA	CLASS OF PLAY	HORIZONTAL		UNIFORMITY
SPORT	LIGHTED AREA	CLASS OF PLAY	LUX	FC	CV	Max:Min
Soccer		I	750	75	<=0.13	<= 1.7:1
		II	500	50	<=0.21	<= 2.5:1
		III	300	30	<=0.25	<= 3.0:1
		IV	200	20	<=0.30	<= 4.0:1

Horizontal illuminance - is a measure of the lumens per unit area on a horizontal surface. Normally it is measured 3 feet above the playing surface.
Uniformity illuminance - is a measure of the rate of change of illuminance expressed as a ratio between the illuminance level of adjacent measuring points on a uniform grid. The limit of uniformity varies with the speed of the ball.
LUX - is a measure of illuminance weighted to the spectral sensitivity of the human eye. It is defined as 1 lux = 1 lumen/square meter.
FC - footcandle. The official definition is 1 footcandle = 10.764 lux, however it is easiest to approximate at 1 footcandle ≈ 10 lux.

Design considerations for optimal light levels to avoid glare and keep uniformity(see two images below:)

fixture

Typical Pole Layout for a Soccer field, Each line represents the light ray from one luminaire(see image below):